Products

Diisopentyl Phthalate

Item number	690260
CAS	605-50-5
Formula	C18H26O4
Molecular weight	306,40 g/mol
Quantity	1X250MG
storage conditions	20 °C
CoA / MSDS	Retrieve CoA Retrieve MSDS Show Safety Data Sheet online

Price

Please log in.

Safety Data Sheet	according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 24.04.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:	Diisopentyl Phthalate
Catalog No.:	690260
Relevant identified uses of the substance or mixture	Identified: Laboratory chemical uses: R&D
Uses advised against:	HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com
Emergency telephone number	HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours.
HAZARDS IDENTIFICATION	2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Skin sensitization (Category 1), H317 Reproductive toxicity (Category 1B), H360FD Short-term (acute) aquatic hazard (Category 1), H400 For the full text of the H-Statements mentioned in this Section, see Section 16.
Label elements
Pictogram	GHS07 exclam exclam GHS08 silhouete silhouete GHS09 Aquatic-pollut-red Aquatic-pollut-red
	2.2 Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal Word Danger Hazard statement(s) H317 May cause an allergic skin reaction. H360FD May damage fertility. May damage the unborn child. H400 Very toxic to aquatic life. Precautionary statement(s) P201 Obtain special instructions before use. P273 Avoid release to the environment. P280 Wear protective gloves. P302 + P352 IF ON SKIN: Wash with plenty of water. P308 + P313 IF exposed or concerned: Get medical advice/ attention. Supplemental Hazard Statements none Restricted to professional users. Reduced Labeling (<= 125 ml) Pictogram Signal Word Danger Hazard statement(s) H317 May cause an allergic skin reaction. H360FD May damage fertility. May damage the unborn child. Precautionary statement(s) P201 Obtain special instructions before use. P280 Wear protective gloves. P302 + P352 IF ON SKIN: Wash with plenty of water. P308 + P313 IF exposed or concerned: Get medical advice/ attention. Supplemental Hazard Statements none 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTS	Substances Synonyms : Phthalic acid diisopentyl ester 1,2-Benzenedicarboxylic acid 1,2-bis(3-methylbutyl) ester Bis(3-methylbutyl) phthalate Diisoamyl phthalate NSC 17070 Formula : C18H26O4 Molecular weight : 306,4 g/mol CAS-No. : 605-50-5 Component bis(3-methylbutyl) phthalate Included in the Candidate List of Substances of Very High Concern (SVHC) according to Regulation (EC) No. 1907/2006 (REACH) Classification Skin Sens. 1; Repr. 1B; Aquatic Acute 1; H317,H360FD, H400M-Factor - Aquatic Acute:10 Concentration <= 100 %
Formula	C18H26O4
Molecular Weight (g/mol)	306.40
CAS-No.	605-50-5
FIRST AID MEASURES	4.1 Description of first-aid measures General advice Consult a physician. Show this material safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 4.3 Indication of any immediate medical attention and special treatment needed No data available
FIRE-FIGHTING MEASURES	5.1 Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Nature of decomposition products not known. 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. 5.4 Further information No data available
ACCIDENTAL RELEASE MEASURES	6.1 Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. For personal protection see section 8. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. 6.4 Reference to other sections For disposal see section 13.
HANDLING AND STORAGE	7.1 Precautions for safe handling Advice on safe handling Avoid exposure - obtain special instructions before use.Advice on safe handling Avoid contact with skin and eyes. Avoid inhalation of vapor or mist. Hygiene measures Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. For precautions see section 2.2. 7.2 Conditions for safe storage, including any incompatibilities Storage conditions Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Storage stability Recommended storage temperature 2 - 8 °C Storage class Storage class (TRGS 510): 6.1C: Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION	8.1 Control parameters Ingredients with workplace control parameters 8.2 Exposure controls Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
PHYSICAL AND CHEMICAL PROPERTIES	9.1 Information on basic physical and chemical properties a) Physical state liquid b) Color light yellow c) Odor No data available d) Melting point/freezing point No data available e) Initial boiling point and boiling range 339 °C at 1.016 hPa - OECD Test Guideline 103 f) Flammability (solid, gas) No data available g) Upper/lower flammability or explosive limits No data available h) Flash point 166 °C i) Autoignition temperature >= 400 °C at 1.011 hPa j) Decomposition temperature No data available k) pH No data available l) Viscosity Viscosity, kinematic: No data available Viscosity, dynamic: No data available m) Water solubility 0,0011 g/l at 20 °C - OECD Test Guideline 105- slightly soluble n) Partition coefficient: n-octanol/water log Pow: 5,6 at 25 °C - OECD Test Guideline 117 o) Vapor pressure 0,000 hPa at 25 °C - OECD Test Guideline 104 p) Density 1,02 g/cm3 at 20 °C - OECD Test Guideline 109 Relative density No data available q) Relative vapor density No data available r) Particle characteristics No data available s) Explosive properties No data available t) Oxidizing properties No data available 9.2 Other safety information Surface tension 58 mN/m at 20 °C
STABILITY AND REACTIVITY	10.1 Reactivity No data available 10.2 Chemical stability Stable under recommended storage conditions. 10.3 Possibility of hazardous reactions No data available 10.4 Conditions to avoid No data available 10.5 Incompatible materials Strong oxidizing agents 10.6 Hazardous decomposition products In the event of fire: see section 5
TOXICOLOGICAL INFORMATION	11.1 Information on toxicological effects Acute toxicity LD50 Oral - Rat - female - >= 2.000 mg/kg (OECD Test Guideline 423) Inhalation: No data available Dermal: No data available Skin corrosion/irritation No skin irritation Serious eye damage/eye irritation No eye irritation Respiratory or skin sensitization in vivo assay - Mouse Result: May cause sensitization by skin contact. (OECD Test Guideline 429) Germ cell mutagenicity Tests on bacterial or mammalian cell cultures did not show mutagenic effects. Test Type: Ames test Test system: S. typhimurium Method: OECD Test Guideline 471 Result: negative Test Type: Ames test Test system: E. coli Method: OECD Test Guideline 471 Result: negative Carcinogenicity No data available Reproductive toxicity Presumed human reproductive toxicant Specific target organ toxicity - single exposure No data available Specific target organ toxicity - repeated exposure No data available Aspiration hazard No data available 11.2 Additional Information To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
ECOLOGICAL INFORMATION	12.1 Toxicity No data available 12.2 Persistence and degradability Biodegradability Result: - Readily biodegradable. 12.3 Bioaccumulative potential No data available 12.4 Mobility in soil No data available 12.5 Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 12.6 Endocrine disrupting properties No data available 12.7 Other adverse effects Very toxic to aquatic life.
DISPOSAL CONSIDERATIONS	13.1 Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product.
TRANSPORT INFORMATION	14.1 UN number ADR/RID: 3082 IMDG: 3082 IATA: 3082 14.2 UN proper shipping name ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (bis(3- methylbutyl) phthalate) IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (bis(3- methylbutyl) phthalate) IATA: Environmentally hazardous substance, liquid, n.o.s. (bis(3-methylbutyl) phthalate) 14.3 Transport hazard class(es) ADR/RID: 9 IMDG: 9 IATA: 9 14.4 Packaging group ADR/RID: III IMDG: III IATA: III 14.5 Environmental hazards ADR/RID: yes IMDG Marine pollutant: yes IATA: yes 14.6 Special precautions for user Further information Packages smaller than or equal to 5 kg / L , not dangerous goods of Class 9
REGULATORY INFORMATION	15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. Authorisations and/or restrictions on use REACH - Candidate List of Substances of Very High Concern for Authorisation (Article 59). : bis(3-methylbutyl) phthalate This product contains a substance listed on Annex XIV of the REACH Regulation (EC) Nr. 1907/2006. Listed substance / Sunset Date : bis(3-methylbutyl) phthalate / 04.07.2020 After the sunset date the use of this substance requires either an authorization or can only be used for exempted uses, e.g. use in scientific research and development which includes routine analytics or use as intermediate. REACH - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles (Annex XVII) : bis(3-methylbutyl) phthalate National legislation Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. : ENVIRONMENTAL HAZARDS 15.2 Chemical Safety Assessment For this product a chemical safety assessment was not carried out
OTHER INFORMATION	The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only!