New user? / Forgot your password?
0 Item | 0,00 €
Need NMR solvents or supplies? Click here and check out our ARMAR Isotopes catalog!
Trifluoroacetic acid sodium salt
| Item number | 691958 |
| CAS | 2923-18-4 |
| Formula | C2F3NaO2 |
| Molecular weight | 136,01 g/mol |
| Quantity | 1X100MG |
| storage conditions | 4 °C |
| CoA / MSDS | Retrieve CoA Retrieve MSDS |
Price | Please log in. |
Part of Product groups:
Product Variations:
Product | Catalog No./ CAS No. | Quantity | Price | |
|---|---|---|---|---|
13C-Trifluoroacetic acid sodium salt solution |  | 691955 | 1X1ML | Please log in. |
 | 691958 | 1X100MG | Please log in. | |
Trifluoroacetic acid sodium salt solution |  | 691959 | 1X1ML | Please log in. |
Trifluoroacetic acid sodium salt solution |  | 692549 | 1X1ML | Please log in. |
| Safety Data Sheet | according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 08.08.2025 |
| IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING | |
| Product name: | Trifluoroacetic acid sodium salt |
| Catalog No.: | 691958 |
| Relevant identified uses of the substance or mixture | Identified: Laboratory chemical uses: R&D |
| Uses advised against: | HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com |
| Emergency telephone number | HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours. |
| HAZARDS IDENTIFICATION | 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Acute Tox. 2 H300 Fatal if swallowed. Acute Tox. 1 H310 Fatal in contact with skin. Acute Tox. 1 H330 Fatal if inhaled. |
| Label elements | |
| Pictogram | GHS06 skull skull |
| 2.2 Label elements Labelling according to Regulation (EC) No 1272/2008 The substance is classified and labelled according to the GB CLP regulation. Hazard pictograms Signal word Danger Hazard-determining components of labelling: sodium trifluoroacetate Hazard statements H300+H310+H330 Fatal if swallowed, in contact with skin or if inhaled. Precautionary statements P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read carefully and follow all instructions. P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor. Trade name: Trifluoroacetic acid sodium salt (Contd. of page 1) 61.0.6 P330 Rinse mouth. P320 Specific treatment is urgent (see on this label). P361+P364 Take off immediately all contaminated clothing and wash it before reuse. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. 2.3 Other hazards Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable. | |
| COMPOSITION/INFORMATION ON INGREDIENTS | 3.1 Chemical characterisation: Substances CAS No. Description 2923-18-4 sodium trifluoroacetate Identification number(s) EC number: 220-879-6 |
| Formula | C2F3NaO2 |
| Molecular Weight (g/mol) | 136.01 |
| CAS-No. | 2923-18-4 |
| FIRST AID MEASURES | 4.1 Description of first aid measures General information: Immediately remove any clothing soiled by the product. Remove breathing equipment only after contaminated clothing have been completely removed. In case of irregular breathing or respiratory arrest provide artificial respiration. After inhalation: Supply fresh air or oxygen; call for doctor. In case of unconsciousness place patient stably in side position for transportation. After skin contact: Immediately wash with water and soap and rinse thoroughly. After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor. After swallowing: Do not induce vomiting; call for medical help immediately. 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. Trade name: Trifluoroacetic acid sodium salt |
| FIRE-FIGHTING MEASURES | 5.1 Extinguishing media Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions. 5.2 Special hazards arising from the substance or mixture During heating or in case of fire poisonous gases are produced. 5.3 Advice for firefighters Protective equipment: Mouth respiratory protective device. |
| ACCIDENTAL RELEASE MEASURES | 6.1 Personal precautions, protective equipment and emergency procedures Mount respiratory protective device. 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water. 6.3 Methods and material for containment and cleaning up: Dispose contaminated material as waste according to section 13. Ensure adequate ventilation. 6.4 Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. |
| HANDLING AND STORAGE | 7.1 Precautions for safe handling Thorough dedusting. Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care. Information about fire - and explosion protection: Keep respiratory protective device available. 7.2 Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storerooms and receptacles: No special requirements. Information about storage in one common storage facility: Not required. Further information about storage conditions: Keep container tightly sealed. 7.3 Specific end use(s) No further relevant information available. |
| EXPOSURE CONTROLS/PERSONAL PROTECTION | 8.1 Control parameters Additional information about design of technical facilities: No further data; see section 7. Ingredients with limit values that require monitoring at the workplace: Not required. Additional information: The lists valid during the making were used as basis. 8.2 Exposure controls Personal protective equipment: General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Store protective clothing separately. Avoid contact with the eyes and skin. Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Eye protection: Not required. |
| PHYSICAL AND CHEMICAL PROPERTIES | 9.1 Information on basic physical and chemical properties General Information Appearance: Form: Solid Colour: Not determined. Odour: Characteristic Odour threshold: Not determined. pH-value: Not applicable. Change in condition Melting point/freezing point: 205–207 °C Initial boiling point and boiling range: Undetermined. Flash point: Not applicable. Flammability Product is not flammable. Decomposition temperature: Not determined. Ignition temperature: Not determined. Explosive properties: Product does not present an explosion hazard. Explosion limits: Lower: Not determined. Upper: Not determined. Vapour pressure: Not applicable. Density at 20 °C: 0.83 g/cm³ Relative density Not determined. Vapour density Not applicable. Evaporation rate Not applicable. Solubility in / Miscibility with water: Soluble. Partition coefficient: n-octanol/water: Not determined. Viscosity: Dynamic: Not applicable. Kinematic: Not applicable. Solids content: 100.0 % 9.2 Other information No further relevant information available. |
| STABILITY AND REACTIVITY | 10.1 Reactivity No further relevant information available. 10.2 Chemical stability Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid No further relevant information available. 10.5 Incompatible materials: No further relevant information available. 10.6 Hazardous decomposition products: No dangerous decomposition products known. |
| TOXICOLOGICAL INFORMATION | 11.1 Information on toxicological effects Acute toxicity Fatal if swallowed, in contact with skin or if inhaled. LD/LC50 values relevant for classification: ATE (Acute Toxicity Estimates) Oral LD50 5 mg/kg Dermal LD50 5 mg/kg Inhalative LC50/4 h 0.005 mg/l Primary irritant effect: Skin corrosion/irritation Based on available data, the classification criteria are not met. Serious eye damage/irritation Based on available data, the classification criteria are not met. Respiratory or skin sensitisation Based on available data, the classification criteria are not met. Additional toxicological information: CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) Germ cell mutagenicity Based on available data, the classification criteria are not met. Carcinogenicity Based on available data, the classification criteria are not met. Reproductive toxicity Based on available data, the classification criteria are not met. STOT-single exposure Based on available data, the classification criteria are not met. STOT-repeated exposure Based on available data, the classification criteria are not met. Aspiration hazard Based on available data, the classification criteria are not met. |
| ECOLOGICAL INFORMATION | 12.1 Toxicity Aquatic toxicity: No further relevant information available. 12.2 Persistence and degradability No further relevant information available. 12.3 Bioaccumulative potential No further relevant information available. 12.4 Mobility in soil No further relevant information available. Additional ecological information: General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. 12.5 Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable. 12.6 Other adverse effects No further relevant information available. |
| DISPOSAL CONSIDERATIONS | 13.1 Waste treatment methods Recommendation Must not be disposed together with household garbage. Do not allow product to reach sewage system. Uncleaned packaging: Recommendation: Disposal must be made according to official regulations. Recommended cleansing agents: Water, if necessary together with cleansing agents. |
| TRANSPORT INFORMATION | 14.1 UN-Number ADR, IMDG, IATA UN2811 14.2 UN proper shipping name ADR 2811 TOXIC SOLID, ORGANIC, N.O.S. IMDG TOXIC SOLID, ORGANIC, N.O.S. IATA Toxic solid, organic, n.o.s. 14.3 Transport hazard class(es) ADR, IMDG, IATA Class 6.1 Toxic substances. Label 6.1 14.4 Packing group ADR III 14.5 Environmental hazards: Not applicable. 14.6 Special precautions for user Warning: Toxic substances. Hazard identification number (Kemler code): 60 14.7 Transport in bulk according to Annex II of Marpol and the IBC Code Not applicable. Transport/Additional information: ADR Limited quantities (LQ) 5 kg Excepted quantities (EQ) Code: E1 Maximum net quantity per inner packaging: 30 g Maximum net quantity per outer packaging: 1000 g Transport category 2 Tunnel restriction code E UN "Model Regulation": UN 2811 TOXIC SOLID, ORGANIC, N.O.S. 6.1, III |
| REGULATORY INFORMATION | 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture Poisons Act Regulated explosives precursors Substance is not listed. Regulated poisons Substance is not listed. Reportable explosives precursors Substance is not listed. Reportable poisons Substance is not listed. Directive 2012/18/EU Named dangerous substances - ANNEX I Substance is not listed. Seveso category H1 ACUTE TOXIC Qualifying quantity (tonnes) for the application of lower-tier requirements 5 t Qualifying quantity (tonnes) for the application of upper-tier requirements 20 t 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. |
| OTHER INFORMATION | The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only! |