US Shop

New user? / Forgot your password?

0 Item | 0,00 €


Item number676458
Molecular weight198,26 g/mol
Quantity 1x10mg
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Show Safety Data Sheet online


Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 30.11.2022
Product name:o-(1-Phenylethyl)phenol
Catalog No.:676458
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf

Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, oral(Category 4) H302
Skin corrosion/irritation (Category 2) H315
Serious eye damage/eye irritation(Category 2A ) H319
Specific target organ toxicity, single exposure;Respiratory system(Category 3) H335
Label elements
PictogramGHS07 exclam
Label elements
Labelling according Regulation (EC) No 1272/2008
Signal word: Warning
Hazard statement(s)
H302 Harmful if swallowed
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary statement(s)
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Molecular Weight (g/mol)198.26
FIRST AID MEASURES4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Continue rinsing eyes during transport to hospital.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media: alcohol-resistant foam, dry chemical or carbon dioxide
Unsuitable extinguishing media: no data
5.2 Special hazards arising from the substance or mixture
In combustion toxic fumes may form.
5.3 Advice for firefighters
Wear self-contained breathing apparatus.
Wear protective clothing to prevent contact with skin and eyes.
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas.
Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Do not attempt to take action without suitable protective clothing.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains or river.
Alert the neighbourhood to the presence of fumes or gas.
6.3 Methods and materials for containment and cleaning up
Mix with sand or vermiculite. Sweep up and shovel. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
HANDLING AND STORAGE7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Ensure there is sufficient ventilation of the area.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated area. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.
PHYSICAL AND CHEMICAL PROPERTIESAppearance Colorless to light yellow liquid
Boiling Point 313.9±11.0°C at 760 mmHg
Melting Point No data available
Odour No data available
Odour Threshold No data available
pH No data available
Flash point No data available
Evapouration rate No data available
Vapour pressure No data available
Vapor Density No data available
Relative density No data available
Solubility in water No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity No Data No data available
Explosive properties No data available
Oxidizing properties No data available
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Carbon monoxide, carbon dioxide.
TOXICOLOGICAL INFORMATIONAcute Toxicity No data available
Skin corrosion/irritation No data available
Serious eye Damage/irritation No data available
Respiratory or skin sensitisation No data available
Germ Cell mutagenicity No data available
Carcinogenicity No data available
Reproductive toxicity No data available
STOT-single exposure No data available
STOT-repeated exposure No data available
Aspiration hazard No data available
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other adverse effects
No data available
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Disposal Operations
Consult state, local or national regulations for proper disposal. Hand over to authorised disposal company as hazardous
Disposal of Packaging
Disposal must be made according to official regulations.
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
14.4 Packaging group
14.5 Environmental hazards
ADR/RID: no IMDG: no IATA: no
14.6 Special precautions for user
No data available
REGULATORY INFORMATIONSafety, health and environmental and national regulations:
Product is not subject to any additional regulations or provisions
Safety Assessment
No Chemical Safety Assessment
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!