US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Eucalyptol

Item number681626
CAS470-82-6
FormulaC10H18O
Molecular weight154,25 g/mol
Quantity 1X1ML
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Eucalyptol

Price

Please log in.

Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Eucalyptol

Eucalyptol

681626
470-82-6

1X1ML

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 10.11.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Eucalyptol
Catalog No.:681626
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATIONClassification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
GHS02 flame
Flam. Liq. 3 H226 Flammable liquid and vapour.
GHS07
Skin Sens. 1B H317 May cause an allergic skin reaction.
Label elements
Pictogramflamme
flamme
GHS07 exclam
exclam
Label elements
Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the CLP regulation.
Signal word Warning
Hazard statements
H226 Flammable liquid and vapour.
H317 May cause an allergic skin reaction.
Precautionary statements
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P241 Use explosion-proof electrical/ventilating/lighting/equipment.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with
water/shower.
P321 Specific treatment (see on this label).
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.

2.3 Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
COMPOSITION/INFORMATION ON INGREDIENTS3.1 Chemical characterisation: Substances
CAS No. Description
470-82-6 Eucalyptol
Identification number(s) None
EC number: 207-431-5
RTECS: OS9275000
FormulaC10H18O
Molecular Weight (g/mol)154.25
CAS-No.470-82-6
FIRST AID MEASURES4.1 Description of first aid measures
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: Rinse mouth. Do not induce vomiting.

4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing agents: CO2, sand, extinguishing powder. Do not use water.
For safety reasons unsuitable extinguishing agents: Water

5.2 Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.

5.3 Advice for firefighters
Protective equipment: Wear self-contained respiratory protective device.
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.

6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.

6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Do not flush with water or aqueous cleansing agents

6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
HANDLING AND STORAGE7.1 Precautions for safe handling Store in cool, dry place in tightly closed receptacles.
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.

7.2 Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:
Please refer to the manufacturers certificate for specific storage and transport temperature conditions.
Store only in the original receptacle.
Keep container in a well-ventilated place. Keep away from sources of ignition and heat.
Information about storage in one common storage facility: Store away from foodstuffs.
Further information about storage conditions:
Keep container tightly sealed.
Protect from heat and direct sunlight.

7.3 Specific end use(s) No further relevant information available.
EXPOSURE CONTROLS/PERSONAL PROTECTIONAdditional information about design of technical facilities: No further data; see item 7.

8.1 Control parameters
Ingredients with limit values that require monitoring at the workplace: Not required.
Additional information: Lists used were valid at the time of SDS preparation.

8.2 Exposure controls
Personal protective equipment:
General protective and hygienic measures: Wash hands before breaks and at the end of work.
Respiratory protection: Not required.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Protective gloves
Material of gloves
Nitrile rubber, NBR
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection:
Tightly sealed goggles
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
General Information
Appearance:
Form: Liquid
Colour: Colourless
Odour: Camphor-like
Odour threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range: 1 -2 °C
Boiling point/Boiling range: 176 - 177 °C
Flash point: 49 °C
Flammability (solid, gaseous): Not determined.
Ignition temperature: Not determined
Decomposition temperature: Not determined.
Self-igniting: Not determined.
Danger of explosion: Product is not explosive. However, formation of explosive air/vapour mixtures is possible.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure at 20 °C: 1.22 hPa
Density at 20 °C: 0.924 g/cm³
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with water at 21 °C: 3.5 g/l
Partition coefficient (n-octanol/water): 2.74 log P
Viscosity:
Dynamic: Not determined.
Kinematic at 20 °C: 3.4 mm²/s

9.2 Other information No further relevant information available.
STABILITY AND REACTIVITY10.1 Reactivity Stable under normal conditions.

10.2 Chemical stability Stable under normal conditions.
Thermal decomposition / conditions to be avoided:
Formation of toxic gases is possible during heating or in case of fire.

10.3 Possibility of hazardous reactions No dangerous reactions known.

10.4 Conditions to avoid
Sources of ignition
Heat.

10.5 Incompatible materials: Strong oxidizing agents.

10.6 Hazardous decomposition products:
Formation of toxic gases is possible during heating or in case of fire.
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity Based on available data, the classification criteria are not met.
LD/LC50 values relevant for classification:
Oral LD50 2480 mg/kg (rat)
Primary irritant effect:
Skin corrosion/irritation Based on available data, the classification criteria are not met.
Serious eye damage/irritation Based on available data, the classification criteria are not met.
Respiratory or skin sensitisation
May cause an allergic skin reaction.
CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
Germ cell mutagenicity Based on available data, the classification criteria are not met.
Carcinogenicity Based on available data, the classification criteria are not met.
Reproductive toxicity Based on available data, the classification criteria are not met.
STOT-single exposure Based on available data, the classification criteria are not met.
STOT-repeated exposure Based on available data, the classification criteria are not met.
Aspiration hazard Based on available data, the classification criteria are not met.
ECOLOGICAL INFORMATION12.1 Toxicity
Aquatic toxicity: No further relevant information available.

12.2 Persistence and degradability No further relevant information available.

12.3 Bioaccumulative potential No further relevant information available.

12.4 Mobility in soil No further relevant information available.
Additional ecological information:
General notes:
Water hazard class 2 (German Regulation) (Assessment by list): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.

12.5 Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.

12.6 Other adverse effects No further relevant information available.
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Recommendation
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
European waste catalogue
Waste disposal key numbers from EWC have to be assigned depending on origin and processing.
Uncleaned packaging:
Recommendation: Dispose of in accordance with national regulations.
TRANSPORT INFORMATION14.1 UN-Number
ADR, IMDG, IATA UN1993
ADR 1993 FLAMMABLE LIQUID, N.O.S. (Eucalyptol)
IMDG, IATA FLAMMABLE LIQUID, N.O.S. (Eucalyptol)

14.3 Transport hazard class(es)
ADR, IMDG, IATA
Class 3 Flammable liquids.
Label 3

14.4 Packing group
ADR, IMDG, IATA III

14.5 Environmental hazards:
Marine pollutant: No

14.6 Special precautions for user Warning: Flammable liquids.
Danger code (Kemler): 33
EMS Number: F-E,S-E

14.7 Transport in bulk according to Annex II of
Marpol and the IBC Code Not applicable.
Transport/Additional information:
ADR
Limited quantities (LQ) 5L
UN "Model Regulation": UN1993, FLAMMABLE LIQUID, N.O.S. (Eucalyptol), 3, III
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Philippines Inventory of Chemicals and Chemical Substances Substance is listed.
Australian Inventory of Chemical Substances Substance is listed.
Standard for the Uniform Scheduling of Medicines and Poisons Substance is not listed.
Directive 2012/18/EU
Qualifying quantity (tonnes) for the application of lower-tier requirements 5.000 t
Qualifying quantity (tonnes) for the application of upper-tier requirements 50.000 t
REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3, 40

15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!