New user? / Forgot your password?
0 Item | 0,00 €
Item number | 688778 |
CAS | 7758-29-4 |
Formula | Na5O10P3 |
Molecular weight | 367,86 g/mol |
Quantity | 1x1000mg |
storage conditions | 20 °C |
Safety Data Sheet | according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 10.12.2023 |
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING | |
Product name: | Sodium tripolyphosphate |
Catalog No.: | 688778 |
Relevant identified uses of the substance or mixture | Identified: Laboratory chemical uses: R&D |
Uses advised against: | HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com |
Emergency telephone number | HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours. |
HAZARDS IDENTIFICATION | 2.1 Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008 |
Label elements | |
Pictogram | |
2.2 Label elements Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. | |
COMPOSITION/INFORMATION ON INGREDIENTS | 3.1 Substances Synonyms : Sodium triphosphate pentabasic Sodium tripolyphosphate pentabasic Pentasodium tripolyphosphate Anhydrous STPP Sodium triphosphate Formula : Na5O10P3 Molecular weight : 367,86 g/mol CAS-No. : 7758-29-4 EC-No. : 231-838-7 No components need to be disclosed according to the applicable regulations |
Formula | Na5O10P3 |
Molecular Weight (g/mol) | 367.86 |
CAS-No. | 7758-29-4 |
FIRST AID MEASURES | 4.1 Description of first-aid measures If inhaled After inhalation: fresh air. In case of skin contact In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. In case of eye contact After eye contact: rinse out with plenty of water. Remove contact lenses. If swallowed After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 4.3 Indication of any immediate medical attention and special treatment needed No data available |
FIRE-FIGHTING MEASURES | 5.1 Extinguishing media Suitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given. 5.2 Special hazards arising from the substance or mixture Oxides of phosphorus Sodium oxides Not combustible. Ambient fire may liberate hazardous vapours 5.3 Advice for firefighters In the event of fire, wear self-contained breathing apparatus. 5.4 Further information Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system |
ACCIDENTAL RELEASE MEASURES | 6.1 Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. 6.2 Environmental precautions Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. 6.4 Reference to other sections For disposal see section 13. |
HANDLING AND STORAGE | 7.1 Precautions for safe handling For precautions see section 2.2. 7.2 Conditions for safe storage, including any incompatibilities Storage conditions Tightly closed. Dry. hygroscopic 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
EXPOSURE CONTROLS/PERSONAL PROTECTION | 8.1 Control parameters Ingredients with workplace control parameters 8.2 Exposure controls Personal protective equipment Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L Respiratory protection required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P1 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. Control of environmental exposure Do not let product enter drains |
PHYSICAL AND CHEMICAL PROPERTIES | 9.1 Information on basic physical and chemical properties a) Appearance Form: granules Color: white b) Odor No data available c) Odor Threshold No data available d) pH 9,5 - 10,3 at 1 g/l e) Melting point/freezing point Melting point/range: 622 °C f) Initial boiling point and boiling range No data available g) Flash point Not applicable h) Evaporation rate No data available i) Flammability (solid, gas) No data available j) Upper/lower flammability or explosive limits No data available k) Vapor pressure No data available l) Vapor density No data available m) Relative density 2,55 at 21 °C - Regulation (EC) No. 440/2008, Annex, A.3 n) Water solubility 148 g/l at 20 °C - Regulation (EC) No. 440/2008, Annex, A.6- completely soluble o) Partition coefficient: n-octanol/water Not applicable for inorganic substances p) Autoignition temperature No data available q) Decomposition temperature No data available r) Viscosity Viscosity, kinematic: No data available Viscosity, dynamic: No data available s) Explosive properties No data available t) Oxidizing properties No data available 9.2 Other safety information Dissociation constant 9,52 at 25 °C - OECD Test Guideline 112 |
STABILITY AND REACTIVITY | 10.1 Reactivity No data available 10.2 Chemical stability The product is chemically stable under standard ambient conditions (room temperature) . 10.3 Possibility of hazardous reactions No data available 10.4 Conditions to avoid Avoid moisture. no information available 10.5 Incompatible materials Strong acids, Strong oxidizing agents 10.6 Hazardous decomposition products In the event of fire: see section 5 |
TOXICOLOGICAL INFORMATION | 11.1 Information on toxicological effects Acute toxicity LD50 Oral - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 401) LC50 Inhalation - Rat - male and female - 4 h - > 0,39 mg/l (US-EPA) LD50 Dermal - Rabbit - > 4.640 mg/kg Remarks: (ECHA) Skin corrosion/irritation Skin - Rabbit Result: No skin irritation - 4 h (OECD Test Guideline 404) Remarks: (IUCLID) Serious eye damage/eye irritation Eyes - Rabbit Result: No eye irritation (OECD Test Guideline 405) Remarks: (IUCLID) Respiratory or skin sensitization Local lymph node assay (LLNA) - Mouse Result: negative (OECD Test Guideline 429) Germ cell mutagenicity Ames test Escherichia coli/Salmonella typhimurium Result: negative Remarks: (IUCLID) Mutagenicity (mammal cell test): chromosome aberration. Chinese hamster lung cells Result: negative Remarks: (ECHA) OECD Test Guideline 475 Rat - male - Bone marrow Result: negative Carcinogenicity IARC: No ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity No data available Specific target organ toxicity - single exposure No data available Specific target organ toxicity - repeated exposure No data available Aspiration hazard No data available 11.2 Additional Information Repeated dose toxicity - Dog - male and female - Oral - NOAEL (No observed adverse effect level) - 100 mg/kgRemarks: (ECHA) RTECS: YK4570000 Gastrointestinal disturbance To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated |
ECOLOGICAL INFORMATION | 12.1 Toxicity Toxicity to fish LC50 - Danio rerio (zebra fish) - > 1.850 mg/l - 24 h Remarks: (ECHA) Toxicity to daphnia and other aquatic invertebrates static test EC50 - Daphnia magna (Water flea) - > 100 mg/l - 48 h Remarks: (ECHA) Toxicity to algae ErC50 - Desmodesmus subspicatus (green algae) - ca. 160 mg/l - 4 Days Remarks: (ECHA) Toxicity to bacteria EC50 - activated sludge - > 1.000 mg/l - 3 h (OECD Test Guideline 209) Remarks: (IUCLID) 12.2 Persistence and degradability The methods for determining biodegradability are not applicable to inorganic substances. 12.3 Bioaccumulative potential No data available 12.4 Mobility in soil No data available 12.5 Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 12.6 Other adverse effects No data available |
DISPOSAL CONSIDERATIONS | 13.1 Waste treatment methods Product See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions |
TRANSPORT INFORMATION | 14.1 UN number ADR/RID: - IMDG: - IATA: - 14.2 UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods 14.3 Transport hazard class(es) ADR/RID: - IMDG: - IATA: - 14.4 Packaging group ADR/RID: - IMDG: - IATA: - 14.5 Environmental hazards ADR/RID: no IMDG Marine pollutant: no IATA: no 14.6 Special precautions for user Further information Not classified as dangerous in the meaning of transport regulations |
REGULATORY INFORMATION | 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. REACH - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, preparations and articles (Annex XVII) : Not applicable National legislation Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. : Not applicable 15.2 Chemical Safety Assessment For this product a chemical safety assessment was not carried out |
OTHER INFORMATION | The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only! |