Products

Bifenazate-diazene

Item number	677149
CAS	149878-40-0
Formula	C17H18N2O3
Molecular weight	298,34 g/mol
Quantity	1X25MG
storage conditions	4 °C
CoA / MSDS	Retrieve CoA Retrieve MSDS Show Safety Data Sheet online

Price

Please log in.

Safety Data Sheet	according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 24.04.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:	Bifenazate-diazene
Catalog No.:	677149
Relevant identified uses of the substance or mixture	Identified: Laboratory chemical uses: R&D
Uses advised against:	HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com
Emergency telephone number	HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours.
HAZARDS IDENTIFICATION	2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008
Label elements
Pictogram	GHS07 exclam exclam GHS08 silhouete silhouete GHS09 Aquatic-pollut-red Aquatic-pollut-red
	2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 The substance is classified and labelled according to the CLP regulation. · Signal word Warning · Hazard statements H317 May cause an allergic skin reaction. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. · Precautionary statements P260 Do not breathe dust/fume/gas/mist/vapours/spray. P273 Avoid release to the environment. P280 Wear protective gloves. P321 Specific treatment (see on this label). P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. 2.3 Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable.
COMPOSITION/INFORMATION ON INGREDIENTS	3.1 Chemical characterisation: Substances · CAS No. Description 149878-40-0 Bifenazate-diazene · Identification number(s) None · EC number: 813-440-0 · RTECS: -
Formula	C17H18N2O3
Molecular Weight (g/mol)	298.34
CAS-No.	149878-40-0
FIRST AID MEASURES	4.1 Description of first aid measures · General information: Immediately remove any clothing soiled by the product. Symptoms of poisoning may occur even after several hours; therefore medical observation for at least 48 hours after the accident is recommended. · After inhalation: Supply fresh air and call a doctor. In case of unconsciousness place patient in recovery position for transport. · After skin contact: Immediately wash with water and soap and rinse thoroughly. · After eye contact: Rinse opened eye for several minutes under running water. · After swallowing: Rinse mouth. Do not induce vomiting. 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available.
FIRE-FIGHTING MEASURES	5.1 Extinguishing media · Suitable extinguishing agents: Use fire extinguishing methods suitable for surrounding conditions. 5.2 Special hazards arising from the substance or mixture During heating or in case of fire poisonous gases are produced. 5.3 Advice for firefighters · Protective equipment: Mouth respiratory protective device.
ACCIDENTAL RELEASE MEASURES	6.1 Personal precautions, protective equipment and emergency procedures Mount respiratory protective device. 6.2 Environmental precautions: Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water. 6.3 Methods and material for containment and cleaning up: Dispose of contaminated material as waste according to item 13. Ensure adequate ventilation. 6.4 Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information.
HANDLING AND STORAGE	7.1 Precautions for safe handling Ensure good ventilation/extraction at the workplace. Store in cool, dry place in tightly closed receptacles. · Information about fire - and explosion protection: Keep respiratory protective device available. 7.2 Conditions for safe storage, including any incompatibilities · Storage: · Requirements to be met by storerooms and receptacles: Please refer to the manufacturers certificate for specific storage and transport temperature conditions. Store only in the original receptacle. Keep container in a well-ventilated place. Keep away from sources of ignition and heat. · Information about storage in one common storage facility: Store away from foodstuffs. · Further information about storage conditions: None. 7.3 Specific end use(s) No further relevant information available.
EXPOSURE CONTROLS/PERSONAL PROTECTION	8.1 Control parameters · Ingredients with limit values that require monitoring at the workplace: Not required. · Additional information: Lists used were valid at the time of SDS preparation. 8.2 Exposure controls · Personal protective equipment: · General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Store protective clothing separately. · Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. · Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374 Protective gloves · Material of gloves Butyl rubber, BR · Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: Tightly sealed goggles
PHYSICAL AND CHEMICAL PROPERTIES	9.1 Information on basic physical and chemical properties · General Information · Appearance: Form: Crystalline Colour: Orange · Odour: Odourless · Odour threshold: Not determined. · pH-value: Not determined. · Change in condition Melting point/freezing point: 117.3 °C Initial boiling point and boiling range: Not determined. · Flash point: Not applicable. · Flammability (solid, gas): Not determined. · Ignition temperature: Not determined · Decomposition temperature: Not determined. · Auto-ignition temperature: Not determined. · Explosive properties: Not determined. · Explosion limits: Lower: Not determined. Upper: Not determined. · Vapour pressure: Not determined. · Density: Not determined. · Relative density Not determined. · Vapour density Not determined. · Evaporation rate Not applicable. · Solubility in / Miscibility with water: Slightly soluble. · Partition coefficient: n-octanol/water: Not determined. · Viscosity: Dynamic: Not determined. Kinematic: Not determined. 9.2 Other information No further relevant information available.
STABILITY AND REACTIVITY	10.1 Reactivity Stable under normal conditions. 10.2 Chemical stability Stable under normal conditions. · Thermal decomposition / conditions to be avoided: Formation of toxic gases is possible during heating or in case of fire. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid Heat. 10.5 Incompatible materials: Strong oxidizing agents. 10.6 Hazardous decomposition products: Formation of toxic gases is possible during heating or in case of fire.
TOXICOLOGICAL INFORMATION	11.1 Information on toxicological effects · Acute toxicity Based on available data, the classification criteria are not met. · Primary irritant effect: · Skin corrosion/irritation Based on available data, the classification criteria are not met. · Serious eye damage/irritation Based on available data, the classification criteria are not met. · Respiratory or skin sensitisation May cause an allergic skin reaction. · CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) · Germ cell mutagenicity Based on available data, the classification criteria are not met. · Carcinogenicity Based on available data, the classification criteria are not met. · Reproductive toxicity Based on available data, the classification criteria are not met. · STOT-single exposure Based on available data, the classification criteria are not met. · STOT-repeated exposure May cause damage to organs through prolonged or repeated exposure. · Aspiration hazard Based on available data, the classification criteria are not met.
ECOLOGICAL INFORMATION	12.1 Toxicity · Aquatic toxicity: EC50/48 h 0.048 mg/l (daphnia) LC50/96 h 0.044 mg/l (fish) 12.2 Persistence and degradability 339 (BCF) 12.3 Bioaccumulative potential No further relevant information available. 12.4 Mobility in soil No further relevant information available. · Ecotoxicological effects: · Remark: Very toxic for fish · Additional ecological information: · General notes: Water hazard class 3 (German Regulation) (Self-assessment): extremely hazardous for water Do not allow product to reach ground water, water course or sewage system, even in small quantities. Danger to drinking water if even extremely small quantities leak into the ground. Also poisonous for fish and plankton in water bodies. Very toxic for aquatic organisms 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. 12.6 Other adverse effects No further relevant information available.
DISPOSAL CONSIDERATIONS	13.1 Waste treatment methods · Recommendation Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · European waste catalogue Waste disposal key numbers from EWC have to be assigned depending on origin and processing. · Uncleaned packaging: · Recommendation: Dispose of in accordance with national regulations.
TRANSPORT INFORMATION	14.1 UN-Number · ADR, IMDG, IATA UN3077 · ADR 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Bifenazate-diazene) · IMDG ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S . (Bi f en azat e- diaz en e) , MARINE POLLUTANT · IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Bifenazate-diazene) 14.3 Transport hazard class(es) · ADR, IMDG, IATA · Class 9 Miscellaneous dangerous substances and articles. · Label 9 14.4 Packing group · ADR, IMDG, IATA III 14.5 Environmental hazards: · Marine pollutant: Symbol (fish and tree) · Special marking (ADR): Symbol (fish and tree) · Special marking (IATA): Symbol (fish and tree) 14.6 Special precautions for user Warning: Miscellaneous dangerous substances and articles. · Danger code (Kemler): 90 · EMS Number: F-A,S-F · Stowage Category A · Stowage Code SW23 When transported in BK3 bulk container, see 7.6.2.12 and 7.7.3.9. 14.7 Transport in bulk according to Annex II of Marpol and the IBC Code Not applicable. · Transport/Additional information: · ADR · Limited quantities (LQ) 5 kg · Excepted quantities (EQ) Code: E1 Maximum net quantity per inner packaging: 30 ml Maximum net quantity per outer packaging: 1000 ml · Transport category 3 · UN "Model Regulation": UN 3 0 7 7 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (BIFENAZATE-DIAZENE), 9, III
REGULATORY INFORMATION	15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · Philippines Inventory of Chemicals and Chemical Substances Substance is not listed. · Australian Inventory of Chemical Substances Substance is not listed. · Standard for the Uniform Scheduling of Medicines and Poisons Substance is not listed. · Directive 2012/18/EU · Named dangerous substances - ANNEX I Substance is not listed. · Seveso category E1 Hazardous to the Aquatic Environment · Qualifying quantity (tonnes) for the application of lower-tier requirements 100 t · Qualifying quantity (tonnes) for the application of upper-tier requirements 200 t 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
OTHER INFORMATION	The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only!