US Shop

New user? / Forgot your password?

0 Item | 0,00 €

Ditalimfos

Item number678998
CAS5131-24-8
FormulaC12H14NO4PS
Molecular weight299,28 g/mol
Quantity 1X50MG
storage conditions4 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Show Safety Data Sheet online
Ditalimfos

Price

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 25.05.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Ditalimfos
Catalog No.:678998
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION· 2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008
skull and crossbones
Acute Tox. 3 H311 Toxic in contact with skin.
Skin Irrit. 2 H315 Causes skin irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.
Label elements
PictogramGHS06 skull
skull
GHS07 exclam
exclam
· 2.2 Label elements
· Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the CLP regulation.
· Hazard pictograms
GHS06
· Signal word Danger
· Hazard statements
H311 Toxic in contact with skin.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
· Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves / protective clothing.
P312 Call a POISON CENTER/doctor if you feel unwell.
P321 Specific treatment (see on this label).
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
COMPOSITION/INFORMATION ON INGREDIENTS· 3.1 Chemical characterisation: Substances
· CAS No. Description
5131-24-8 Ditalimfos (ISO)
· Identification number(s) None
· EC number: 225-875-8
· Index number: 015-120-00-9
· RTECS: TB 2050000
· Additional information: For the wording of the listed hazard phrases refer to section 16.
FormulaC12H14NO4PS
Molecular Weight (g/mol)299.28
CAS-No.5131-24-8
FIRST AID MEASURES· 4.1 Description of first aid measures
· General information:
Immediately remove any clothing soiled by the product.
In case of irregular breathing or respiratory arrest provide artificial respiration.
· After inhalation:
Supply fresh air and call a doctor.
In case of unconsciousness place patient in recovery position for transport.
· After skin contact:
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
If skin irritation continues, consult a doctor.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing: Rinse mouth. Do not induce vomiting.
· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available
FIRE-FIGHTING MEASURES· 5.1 Extinguishing media
· Suitable extinguishing agents: Use fire extinguishing methods suitable for surrounding conditions.
· 5.2 Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
· 5.3 Advice for firefighters
· Protective equipment: Wear self-contained respiratory protective device.
ACCIDENTAL RELEASE MEASURES· 6.1 Personal precautions, protective equipment and emergency procedures Wear protective clothing.
· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.
· 6.3 Methods and material for containment and cleaning up:
Dispose of contaminated material as waste according to item 13.
· 6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information
HANDLING AND STORAGE· 7.1 Precautions for safe handling
Remove dust thoroughly.
Store in cool, dry place in tightly closed receptacles.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Please refer to the manufacturers certificate for specific storage and transport temperature conditions.
Store only in the original receptacle unless other advice is given on the CoA.
Keep container in a well-ventilated place. Keep away from sources of ignition and heat.
· Information about storage in one common storage facility: Store away from foodstuffs.
· Further information about storage conditions: Non
· 7.3 Specific end use(s) No further relevant information available.
EXPOSURE CONTROLS/PERSONAL PROTECTION· 8.1 Control parameters
· Additional information about design of technical facilities: No further data; see item 7.
· Ingredients with limit values that require monitoring at the workplace: Not required.
· Additional information: Lists used were valid at the time of SDS preparation.
· 8.2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the skin.
Avoid contact with the eyes and skin.
· Respiratory protection:
Not required.
Use suitable respiratory protective device in case of insufficient ventilation.
· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the
related standard EN374
Protective gloves
· Material of gloves Butyl rubber, BR
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection: Safety glasses
PHYSICAL AND CHEMICAL PROPERTIES· 9.1 Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Solid
Colour: Colourless
· Odour: Light
· Odour threshold: Not determined.
· pH-value: Not applicable.
· Change in condition
Melting point/freezing point: 83-84 °C
Initial boiling point and boiling range: Not determined.
· Flash point: Not applicable.
· Flammability (solid, gas): Not determined.
· Ignition temperature: Not determined
· Decomposition temperature: Not determined.
· Auto-ignition temperature: Not determined.
· Explosive properties: Not determined.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapour pressure at 25 °C: 0.0000019 hPa
· Density: Not determined.
· Relative density Not determined.
· Vapour density Not applicable.
· Evaporation rate Not applicable.
· Solubility in / Miscibility with
water at 20 °C: 0.026 g/l
· Partition coefficient: n-octanol/water: 3.48 Log P
· Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
· 9.2 Other information No further relevant information available.
STABILITY AND REACTIVITY· 10.1 Reactivity
Stable under normal conditions.
No further relevant information available.
· 10.2 Chemical stability Stable under normal conditions.
· Thermal decomposition / conditions to be avoided:
Formation of toxic gases is possible during heating or in case of fire.
· 10.3 Possibility of hazardous reactions No dangerous reactions known.
· 10.4 Conditions to avoid Heat.
· 10.5 Incompatible materials: Strong oxidizing agents.
· 10.6 Hazardous decomposition products:
Formation of toxic gases is possible during heating or in case of fire.
TOXICOLOGICAL INFORMATION· 11.1 Information on toxicological effects
· Acute toxicity
Toxic in contact with skin.
· LD/LC50 values relevant for classification:
Oral LD50 4,930 mg/kg (rat)
Dermal LD50 1,000 mg/kg (rabbit)
LD 50 (Intraperitoneal) 335 mg/kg (mouse)
198 mg/kg (rat)
· Primary irritant effect:
· Skin corrosion/irritation
Causes skin irritation.
· Serious eye damage/irritation Based on available data, the classifcation criteria are not met.
· Respiratory or skin sensitisation
May cause an allergic skin reaction.
· Additional toxicological information:
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
· Germ cell mutagenicity Based on available data, the classification criteria are not met.
· Carcinogenicity Based on available data, the classification criteria are not met.
· Reproductive toxicity Based on available data, the classification criteria are not met.
· STOT-single exposure Based on available data, the classification criteria are not met.
· STOT-repeated exposure Based on available data, the classification criteria are not met.
· Aspiration hazard Based on available data, the classification criteria are not met.
ECOLOGICAL INFORMATION· 12.1 Toxicity
· Aquatic toxicity: No further relevant information available.
· 12.2 Persistence and degradability No further relevant information available.
· 12.3 Bioaccumulative potential No further relevant information available.
· 12.4 Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water
Do not allow undiluted product to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· 12.6 Other adverse effects No further relevant information available.
DISPOSAL CONSIDERATIONS· 13.1 Waste treatment methods
· Recommendation
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
· Uncleaned packaging:
· Recommendation: Dispose of in accordance with national regulations.
TRANSPORT INFORMATION· 14.1 UN-Number
· ADR, IMDG, IATA UN2811
· ADR 2811 TOXIC SOLID, ORGANIC, N.O.S. (ditalimfos)
· IMDG, IATA TOXIC SOLID, ORGANIC, N.O.S. (ditalimfos)
· 14.3 Transport hazard class(es)
· ADR, IMDG, IATA
· Class 6.1 Toxic substances.
· Label 6.1
· 14.4 Packing group
· ADR, IMDG, IATA III
· 14.5 Environmental hazards: Not applicable.
· 14.6 Special precautions for user Warning: Toxic substances.
· Hazard identification number (Kemler code): 60
· EMS Number: F-A,S-A
· Stowage Category A
· 14.7 Transport in bulk according to Annex II of
Marpol and the IBC Code Not applicable.
· Transport/Additional information:
· ADR
· Limited quantities (LQ) 5 kg
· Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 g
Maximum net quantity per outer packaging: 1000 g
· Transport category 2
· Tunnel restriction code E
· UN "Model Regulation": UN 2 8 1 1 TOXIC SOLID, ORGANIC, N.O. S .
(DITALIMFOS), 6.1, III
REGULATORY INFORMATION· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I Substance is not listed.
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!