US Shop

New user? / Forgot your password?

0 Item | 0,00 €

1-(Methoxymethyl)-1H-imidazole

Item number690019
CAS20075-26-7
FormulaC5H8N2O
Molecular weight112,13 g/mol
Quantity 1X100MG
storage conditions4 °C

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 28.03.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:1-(Methoxymethyl)-1H-imidazole
Catalog No.:690019
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Acute toxicity, oral(Category 4) H302
Skin corrosion/irritation (Category 2) H315
Serious eye damage/eye irritation(Category 2A ) H319
Specific target organ toxicity, single exposure;Respiratory system(Category 3) H335
No Resource File
Label elements
PictogramGHS07 exclam
exclam
GHS Label elements, including precautionary statements
Pictogram
Signal word
Hazard statement(s)
H302 Harmful if swallowed
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary statement(s)
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
2.3 Other hazards.
Additional precautionary phrases are located throughout the safety data sheet
COMPOSITION/INFORMATION ON INGREDIENTSMolecular Formula: C5H8N2O
Molecular Weight: 112.1298
Component 1-(Methoxymethyl)-1H-imidazole
CAS Number 20075-26-7
FormulaC5H8N2O
Molecular Weight (g/mol)112.13
CAS-No.20075-26-7
FIRST AID MEASURES4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to
hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Continue rinsing eyes during transport
to hospital.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a
physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media: alcohol-resistant foam, dry chemical or carbon dioxide
Unsuitable extinguishing media: no data
5.2 Special hazards arising from the substance or mixture
In combustion toxic fumes may form.
5.3 Advice for firefighters
Wear self-contained breathing apparatus.
Wear protective clothing to prevent contact with skin and eyes.
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas.
Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Do not attempt to take action without suitable protective clothing.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains or river.
Alert the neighbourhood to the presence of fumes or gas.
6.3 Methods and materials for containment and cleaning up
Mix with sand or vermiculite. Sweep up and shovel. Transfer to a closable, labelled salvage container for disposal by an
appropriate method.
6.4 Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Ensure there
is sufficient ventilation of the area.
Normal measures for preventive fire protection. For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated area. Containers which are opened must be carefully resealed and
kept upright to prevent leakage.Sealed in dry,Room Temperature
7.3 Specific end use(s)
The end use(s) have not been fully determined. The substance is supplied for Research and Development purposes by
professionals only
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of
workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government
standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves
outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry
hands.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or
type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection,
use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.
PHYSICAL AND CHEMICAL PROPERTIESAppearance Colorless or White to Yellow Solid or Liquid
Boiling Point 227.2°C at 760 mmHg
Melting Point -27°C
Odour No data available
Odour Threshold No data available
pH No data available
Flash point No data available
Evapouration rate No data available
Vapour pressure No data available
Vapor Density No data available
Relative density No data available
Solubility in water No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity No Data No data available
Explosive properties No data available
Oxidizing properties No data available
STABILITY AND REACTIVITY10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
Air sensitive.
10.5 Incompatible materials
Air sensitive.Strong acids.
10.6 Hazardous decomposition products
Carbon monoxide, carbon dioxide, nitrogen oxides.
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute Toxicity No data available
Skin corrosion/irritation No data available
Serious eye Damage/irritation No data available
Respiratory or skin sensitisation No data available
Germ Cell mutagenicity No data available
Carcinogenicity No data available
Reproductive toxicity No data available
STOT-single exposure No data available
STOT-repeated exposure No data available
Aspiration hazard No data available
11.2 Additional
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH
ECOLOGICAL INFORMATION12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other adverse effects
No data available
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Disposal Operations
Consult state, local or national regulations for proper disposal. Hand over to authorised disposal company as hazardous
waste.
Disposal of Packaging
Disposal must be made according to official regulations.
TRANSPORT INFORMATIONDOT (US)
Classed non-hazardous for shipping.
IMDG
Classed non-hazardous for shipping.
IATA
Classed non-hazardous for shipping.
REGULATORY INFORMATIONSafety, health and environmental and national regulations:
Product is not subject to any additional regulations or provisions
Safety Assessment
No Chemical Safety Assessment
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!