New user? / Forgot your password?
0 Item | 0,00 €
Item number | 678290 |
CAS | 28553-12-0 |
Formula | C26H42O4 |
Molecular weight | 418,61 g/mol |
Quantity | 1X250MG |
storage conditions | 20 °C |
CoA / MSDS | Retrieve CoA Retrieve MSDS |
Product | Catalog No./ CAS No. | Quantity | Price | |
---|---|---|---|---|
678290 | 1X250MG | Please log in. | ||
Diisononyl phthalate (mixture of branched chain isomers) solution | 692172 | 1X10ML | Please log in. | |
Diisononyl phthalate (mixture of branched chain isomers) solution | 692184 | 1X1ML | Please log in. |
Safety Data Sheet | according to Regulation (EC) No 1907/2006 (REACH) Classifications according to Regulation (EC) No 1272/2008. Printdate 11.10.2024 |
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING | |
Product name: | Diisononyl phthalate (mixture of branched chain isomers) |
Catalog No.: | 678290 |
Relevant identified uses of the substance or mixture | Identified: Laboratory chemical uses: R&D |
Uses advised against: | HPC Standards GmbH Am Wieseneck 7 04451 Cunnersdorf Deutschland Tel. +49 34291 3372-36 Fax. +49 34291 3372-39 contact@hpc-standards.com |
Emergency telephone number | HPC Standards Tel. +49 34291 3372-36 This number is only available during office hours. |
HAZARDS IDENTIFICATION | 2.1 Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008 |
Label elements | |
Pictogram | |
2.2 Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram none Signal word none Hazard statement(s) none Precautionary statement(s) none Supplemental Hazard Statements none Safety data sheet available on request. 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher | |
COMPOSITION/INFORMATION ON INGREDIENTS | 3.2 Mixtures Formula : C26H42O4 Molecular weight : 418,61 g/mol Hazardous ingredients according to Regulation (EC) No 1272/2008 Component Classification Concentration bis(2-Ethylhexyl) phthalate Included in the Candidate List of Substances of Very High Concern (SVHC) according to Regulation (EC) No. 1907/2006 (REACH) CAS-No. EC-No. Index-No. Registration number 117-81-7 204-211-0 607-317-00-9 01-2119484611-38-XXXX Repr. 1B; H360FD < 0,3 % bis(2-Ethylhexyl) phthalate Included in the Candidate List of Substances of Very High Concern (SVHC) according to Regulation (EC) No. 1907/2006 (REACH) CAS-No. EC-No. Index-No. Registration number 117-81-7 204-211-0 607-317-00-9 01-2119484611-38-XXXX Repr. 1B; H360FD >= 0,1 - < 0,3 % |
Formula | C26H42O4 |
Molecular Weight (g/mol) | 418.61 |
CAS-No. | 28553-12-0 |
FIRST AID MEASURES | 4.1 Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 4.3 Indication of any immediate medical attention and special treatment needed No data available |
FIRE-FIGHTING MEASURES | 5.1 Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Carbon oxides 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary 5.4 Further information No data available |
ACCIDENTAL RELEASE MEASURES | 6.1 Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. For personal protection see section 8. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. 6.4 Reference to other sections For disposal see section 13 |
HANDLING AND STORAGE | 7.1 Precautions for safe handling Avoid exposure - obtain special instructions before use.Avoid inhalation of vapour or mist. For precautions see section 2.2. 7.2 Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Storage class (TRGS 510): Non Combustible Liquids 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
EXPOSURE CONTROLS/PERSONAL PROTECTION | 8.1 Control parameters Components with workplace control parameters 8.2 Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry Hands Body Protection Impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. |
PHYSICAL AND CHEMICAL PROPERTIES | 9.1 Information on basic physical and chemical properties a) Appearance Form: liquid b) Odour No data available c) Odour Threshold No data available d) pH No data available e) Melting point/freezing point No data available f) Initial boiling point and boiling range No data available g) Flash point No data available h) Evaporation rate No data available i) Flammability (solid, gas) No data available j) Upper/lower flammability or explosive limits No data available k) Vapour pressure No data available l) Vapour density No data available m) Relative density 0,972 g/mL at 25 °C n) Water solubility No data available o) Partition coefficient: noctanol/ water No data available p) Auto-ignition temperature No data available q) Decomposition temperature No data available r) Viscosity No data available s) Explosive properties No data available t) Oxidizing properties No data available 9.2 Other safety information No data available |
STABILITY AND REACTIVITY | 10.1 Reactivity No data available 10.2 Chemical stability Stable under recommended storage conditions. 10.3 Possibility of hazardous reactions No data available 10.4 Conditions to avoid No data available 10.5 Incompatible materials No data available 10.6 Hazardous decomposition products Other decomposition products - No data available In the event of fire: see section 5 |
TOXICOLOGICAL INFORMATION | 11.1 Information on toxicological effects Acute toxicity LD50 Oral - Rat - male and female - > 10.000 mg/kg (OECD Test Guideline 401) LC50 Inhalation - Rat - 4 h - > 4,4 mg/l LD50 Dermal - Rabbit - > 3.160 mg/kg Skin corrosion/irritation Skin - Rabbit Result: No skin irritation - 4 h (OECD Test Guideline 404) Serious eye damage/eye irritation Eyes - Rabbit Result: No eye irritation (OECD Test Guideline 405) Respiratory or skin sensitisation Buehler Test - Guinea pig Result: Does not cause skin sensitisation. (Directive 67/548/EEC, Annex V, B.6.) Germ cell mutagenicity Ames test S. typhimurium Result: negative Carcinogenicity IARC: 2B - Group 2B: Possibly carcinogenic to humans (bis(2-Ethylhexyl) phthalate) Reproductive toxicity No data available Specific target organ toxicity - single exposure No data available Specific target organ toxicity - repeated exposure No data available Aspiration hazard No data available Additional Information RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Kidney - (bis(2-Ethylhexyl) phthalate) |
ECOLOGICAL INFORMATION | 12.1 Toxicity Toxicity to fish semi-static test LC50 - Danio rerio (zebra fish) - > 102 mg/l - 96 h (Directive 67/548/EEC, Annex V, C.1.) Toxicity to daphnia and other aquatic invertebrates Growth inhibition - Daphnia magna (Water flea) - > 74 mg/l - 48 h (Directive 67/548/EEC, Annex V, C.2.) Toxicity to algae static test EC50 - Desmodesmus subspicatus (Scenedesmus subspicatus) - > 88 mg/l - 72 h (Directive 67/548/EEC, Annex V, C.3.) 12.2 Persistence and degradability Biodegradability aerobic - Exposure time 28 d Result: 81 % - Readily biodegradable (Directive 67/548/EEC Annex V, C.4.C.) 12.3 Bioaccumulative potential Bioaccumulation Oncorhynchus mykiss (rainbow trout) Bioconcentration factor (BCF): < 3 Remarks: Bioaccumulation is unlikely. 12.4 Mobility in soil Adsorbs on soil. 12.5 Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 12.6 Other adverse effects No data available |
DISPOSAL CONSIDERATIONS | 13.1 Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product |
TRANSPORT INFORMATION | 14.1 UN number ADR/RID: - IMDG: - IATA: - 14.2 UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods 14.3 Transport hazard class(es) ADR/RID: - IMDG: - IATA: - 14.4 Packaging group ADR/RID: - IMDG: - IATA: - 14.5 Environmental hazards ADR/RID: no IMDG Marine pollutant: no IATA: no 14.6 Special precautions for user No data available |
REGULATORY INFORMATION | 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Authorisations and/or restrictions on use REACH - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, preparations and articles (Annex XVII) : bis(2-Ethylhexyl) phthalate Diisononyl phthalate REACH - Candidate List of Substances of Very High Concern for Authorisation (Article 59). : bis(2-Ethylhexyl) phthalate REACH - List of substances subject to authorisation (Annex XIV) : bis(2-Ethylhexyl) phthalate 15.2 Chemical Safety Assessment For this product a chemical safety assessment was not carried out |
OTHER INFORMATION | The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. For lab use only! |