US Shop

New user? / Forgot your password?

0 Item | 0,00 €

 

 

Diisopentyl Phthalate

Item number690260
CAS605-50-5
FormulaC18H26O4
Molecular weight306,40 g/mol
Quantity 1X250MG
storage conditions20 °C
CoA / MSDSRetrieve CoA
Retrieve MSDS
Diisopentyl Phthalate

Price

Please log in.

Part of Product groups:
Product Variations:

Product

Catalog No./ CAS No.

Quantity

Price

Diisopentyl Phthalate

Diisopentyl Phthalate

690260
605-50-5

1X250MG

Please log in.

Safety Data Sheetaccording to Regulation (EC) No 1907/2006 (REACH)
Classifications according to Regulation (EC) No 1272/2008.
Printdate 04.12.2024
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name:Diisopentyl Phthalate
Catalog No.:690260
Relevant identified uses of the substance or mixtureIdentified: Laboratory chemical
uses: R&D
Uses advised against:HPC Standards GmbH
Am Wieseneck 7

04451 Cunnersdorf
Deutschland


Tel. +49 34291 3372-36
Fax. +49 34291 3372-39
contact@hpc-standards.com
Emergency telephone numberHPC Standards Tel. +49 34291 3372-36
This number is only available during office hours.
HAZARDS IDENTIFICATION2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin sensitization (Category 1), H317
Reproductive toxicity (Category 1B), H360FD
Short-term (acute) aquatic hazard (Category 1), H400
For the full text of the H-Statements mentioned in this Section, see Section 16.
Label elements
PictogramGHS07 exclam
exclam
GHS08 silhouete
silhouete
GHS09 Aquatic-pollut-red
Aquatic-pollut-red
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal Word Danger
Hazard statement(s)
H317 May cause an allergic skin reaction.
H360FD May damage fertility. May damage the unborn child.
H400 Very toxic to aquatic life.
Precautionary statement(s)
P201 Obtain special instructions before use.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
Supplemental Hazard
Statements
none
Restricted to professional users.
Reduced Labeling (<= 125 ml)
Pictogram
Signal Word Danger
Hazard statement(s)
H317 May cause an allergic skin reaction.
H360FD May damage fertility. May damage the unborn child.
Precautionary statement(s)
P201 Obtain special instructions before use.
P280 Wear protective gloves.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
Supplemental Hazard
Statements
none
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
COMPOSITION/INFORMATION ON INGREDIENTSSubstances
Synonyms : Phthalic acid diisopentyl ester
1,2-Benzenedicarboxylic acid 1,2-bis(3-methylbutyl) ester
Bis(3-methylbutyl) phthalate
Diisoamyl phthalate
NSC 17070
Formula : C18H26O4
Molecular weight : 306,4 g/mol
CAS-No. : 605-50-5
Component bis(3-methylbutyl) phthalate Included in the Candidate List of Substances of Very High
Concern (SVHC) according to Regulation (EC) No. 1907/2006 (REACH)
Classification Skin Sens. 1; Repr. 1B; Aquatic Acute 1; H317,H360FD, H400M-Factor - Aquatic Acute:10
Concentration <= 100 %
FormulaC18H26O4
Molecular Weight (g/mol)306.40
CAS-No.605-50-5
FIRST AID MEASURES4.1 Description of first-aid measures
General advice
Consult a physician. Show this material safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult
a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
FIRE-FIGHTING MEASURES5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Nature of decomposition products not known.
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available
ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate
ventilation. Evacuate personnel to safe areas.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in
suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE7.1 Precautions for safe handling
Advice on safe handling
Avoid exposure - obtain special instructions before use.Advice on safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapor or mist.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and at the end of workday.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent
leakage.
Storage stability
Recommended storage temperature
2 - 8 °C
Storage class
Storage class (TRGS 510): 6.1C: Combustible, acute toxic Cat.3 / toxic compounds or
compounds which causing chronic effects
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parameters
Ingredients with workplace control parameters
8.2 Exposure controls
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and
approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove
removal technique (without touching glove s outer surface) to avoid skin contact
with this product. Dispose of contaminated gloves after use in accordance with
applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU)
2016/425 and the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must
be selected according to the concentration and amount of the dangerous substance
at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a fullface
respirator with multi-purpose combination (US) or type ABEK (EN 14387)
respirator cartridges as a backup to engineering controls. If the respirator is the sole
means of protection, use a full-face supplied air respirator. Use respirators and
components tested and approved under appropriate government standards such as
NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Discharge into the environment must be avoided.
PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical properties
a) Physical state liquid
b) Color light yellow
c) Odor No data available
d) Melting
point/freezing point
No data available
e) Initial boiling point
and boiling range
339 °C at 1.016 hPa - OECD Test Guideline 103
f) Flammability (solid,
gas)
No data available
g) Upper/lower
flammability or
explosive limits
No data available
h) Flash point 166 °C
i) Autoignition
temperature
>= 400 °C
at 1.011 hPa
j) Decomposition
temperature
No data available
k) pH No data available
l) Viscosity Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
m) Water solubility 0,0011 g/l at 20 °C - OECD Test Guideline 105- slightly soluble
n) Partition coefficient:
n-octanol/water
log Pow: 5,6 at 25 °C - OECD Test Guideline 117
o) Vapor pressure 0,000 hPa at 25 °C - OECD Test Guideline 104
p) Density 1,02 g/cm3 at 20 °C - OECD Test Guideline 109
Relative density No data available
q) Relative vapor
density
No data available
r) Particle
characteristics
No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
9.2 Other safety information
Surface tension 58 mN/m at 20 °C
STABILITY AND REACTIVITY10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
In the event of fire: see section 5
TOXICOLOGICAL INFORMATION11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - female - >= 2.000 mg/kg
(OECD Test Guideline 423)
Inhalation: No data available
Dermal: No data available
Skin corrosion/irritation
No skin irritation
Serious eye damage/eye irritation
No eye irritation
Respiratory or skin sensitization
in vivo assay - Mouse
Result: May cause sensitization by skin contact.
(OECD Test Guideline 429)
Germ cell mutagenicity
Tests on bacterial or mammalian cell cultures did not show mutagenic effects.
Test Type: Ames test
Test system: S. typhimurium
Method: OECD Test Guideline 471
Result: negative
Test Type: Ames test
Test system: E. coli
Method: OECD Test Guideline 471
Result: negative
Carcinogenicity
No data available
Reproductive toxicity
Presumed human reproductive toxicant
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
11.2 Additional Information
To the best of our knowledge, the chemical, physical, and toxicological properties have not
been thoroughly investigated.
ECOLOGICAL INFORMATION12.1 Toxicity
No data available
12.2 Persistence and degradability
Biodegradability Result: - Readily biodegradable.
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Endocrine disrupting properties
No data available
12.7 Other adverse effects
Very toxic to aquatic life.
DISPOSAL CONSIDERATIONS13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION14.1 UN number
ADR/RID: 3082 IMDG: 3082 IATA: 3082
14.2 UN proper shipping name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (bis(3-
methylbutyl) phthalate)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (bis(3-
methylbutyl) phthalate)
IATA: Environmentally hazardous substance, liquid, n.o.s. (bis(3-methylbutyl)
phthalate)
14.3 Transport hazard class(es)
ADR/RID: 9 IMDG: 9 IATA: 9
14.4 Packaging group
ADR/RID: III IMDG: III IATA: III
14.5 Environmental hazards
ADR/RID: yes IMDG Marine pollutant: yes IATA: yes
14.6 Special precautions for user
Further information
Packages smaller than or equal to 5 kg / L , not dangerous goods of Class 9
REGULATORY INFORMATION15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This material safety data sheet complies with the requirements of Regulation (EC) No.
1907/2006.
Authorisations and/or restrictions on use
REACH - Candidate List of Substances of Very
High Concern for Authorisation (Article 59).
: bis(3-methylbutyl) phthalate
This product contains a substance listed on Annex XIV of the REACH Regulation (EC) Nr.
1907/2006.
Listed substance / Sunset Date : bis(3-methylbutyl) phthalate /
04.07.2020
After the sunset date the use of this substance requires either an authorization or can only
be used for exempted uses, e.g. use in scientific research and development which includes
routine analytics or use as intermediate.
REACH - Restrictions on the manufacture,
placing on the market and use of certain
dangerous substances, mixtures and articles
(Annex XVII)
: bis(3-methylbutyl) phthalate
National legislation
Seveso III: Directive 2012/18/EU of the European
Parliament and of the Council on the control of
major-accident hazards involving dangerous
substances.
: ENVIRONMENTAL HAZARDS
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
OTHER INFORMATIONThe above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. For lab use only!